Reactor questions

[paddyob]

Originally Posted by fishytime

Ok lets get this out of the way.......around 600gph for carbon.....300-400gph for GFO/rowaphos........and its impossible to daisy-chain two TLF reactors (or any reactors for that matter)together and get the proper flow to each media......sorry all, that was just buggin me, I feel better now

From TLF web site... link follows...

"Use with any pump having a capacity between 100 and 250 gph, but regulate the flow rate to the recommended 20 to 30 gallons per hour with the included ball valve."

http://www.twolittlefishies.com/tlf_...html?lang_id=1


So I am wondering now.... does this just apply to Phosban and the other medias actually require higher flow?

I bought my Maxijet 1200 based on flow recommendations... any thoughts on this?

[Frozenocean]

20 to 30 GPH for GFO......seems light.......you would have to dial the MJ1200. Dodown quite a bit.....confusing

[cwatkins]

I think it all comes down to what reactor and how much media you are using (which is relative to tank size).