![]() |
#24
|
|||||
|
|||||
![]() Quote:
![]() There are 4 holes drilled in the top brace to accommodate 4 seaswirls, which were to be fed by the 4 holes drilled in the lower bottom back of the tank. My original sump return was to be determined and because the tank is acrylic I have the ability to reasonable modify it. What I would like to do is use only the front two top holes for the seaswirls and drop a couple supply pipes originating from the sump down the back two top holes. The two supply pipes would alternate the flow, clockwise or counter clockwise in 5 hours one direction with a 1 hour rest followed by 5 hours in the opposite direction, 1 hour rest. Repeat. The top zone would be kept moving through the closed loop full time. I have 1 reeflo dart supergold for the closed loop and 1 reeflo dart supergold for the sump return. Depending on the results of the final setup, I was leaving open the option of adding the MP60's. The price of them is giving me a lot of incentive to minimize how many (if any) I put in there. Mitch |