Aquasafe RO/DI?

[Reef-Geek]

I finally made the decision and bought the unit, took me 30 mins to install it(I only installed 2 DI units and I hook it up with kitchen faucet), the thing is it leaks everywhere, I tried very hard to screw and it still leaks, I wonder if it happens to you all? I plan buy buy some white plumbing tapes to see if that helps, am I able to do that?

[mark]

where's it leaking?

[Reef-Geek]

almost half of those U shape connection leaks

[Sebae again]

Is the tubing pushed all the way into the fitting ? You must use teflon on all threaded joints.

[Reef-Geek]

Originally Posted by Sebae again

Is the tubing pushed all the way into the fitting ? You must use teflon on all threaded joints.

Tubes are pushed all the way down, I now use teflon on all threaded joints, no more leaks, exception I broke one the elbow connector by turning it too hard

[Arok3000]

Originally Posted by shingo43

Tubes are pushed all the way down, I now use teflon on all threaded joints, no more leaks, exception I broke one the elbow connector by turning it too hard

Originally Posted by Arok3000

Like was mentioned, use a buttload of teflon tape on the fittings.
I snapped 2 fittings in the process because I tried to skimp on the tape, and my only issue with the fittings is they use metric fittings, which aren't so readily available at your local hardware store.

Don't feel too bad!