|
|
|
#37
11-23-2010, 04:18 AM
|
|||||
|
|||||
Between work and the family I got some time make some progress on the fixture. The LED's are mounted to the heat sinks in the standard alternating blue/white pattern. The assembly was fairly simple with the screws provided in the kit. All I needed to do was apply some of the thermal grease and screw into place. A word of caution regarding the grease.....a little goes a LONG way.
 Some planning is required in order to position the LED's in order to connect them in series. I also found that the wires that came in the kit were too short for the layout that I have. They are okay if I were to connect the LED's side by side, but came up quite a bit short running diagonally.
__________________
Sunil One day I'll be finished......then What? 
|
Threaded Mode
