RI/DI problem

[legendboy]

If your TDS is reading .01 your membrane is shot. Outside of that fact, I am not sure how that relates to your DI only filling half.

Maybe check to see if your waste water volume has greatly increased?

[mark]

find after changing filters or resin, my DI chamber takes a little time fill completely with water. As for the TDS 0.01? Normally seem given in whole numbers.

[Coleus]

I just recent replace the resin for DI chamber. Mine is aqua fx 4 stages with dual membranes. I just change my membranes last year. The TDS read 183 for in and 0.01 for out

[hillegom]

I think you shouldn't worry about it then. The air space will get smaller, untill its gone.

[Coleus]

I also sense the water flowing into my membrane is on short continuously pulse if i touch it

[KrazyKuch]

Originally Posted by Coleus

I also sense the water flowing into my membrane is on short continuously pulse if i touch it

whats the water pressure like before your RO/DI?

[mark]

pulsing might be due to the check valve and ASOV

[Coleus]

Originally Posted by KrazyKuch

whats the water pressure like before your RO/DI?

it has been always 70 psi