![]() |
|
#1
|
|||||
|
|||||
![]() I personally didn't have that problem, and my skimmer worked fine. As Coleus stated, my skimmate to went from green to dark brown, probably due to the fact there was no more algae, and now it was just removing the excess nutrients.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#2
|
||||
|
||||
![]() My skimmate also went darker & thicker at the same settings.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#3
|
||||
|
||||
![]() http://www.youtube.com/watch?v=lXpR5HFV5tU
Sorry for the crappy video quality i shot this with my phone.. Is my media tumbling fine or to aggressive when i dial it back more i get a dead spot on the right side |
#4
|
||||
|
||||
![]() i think that is way too aggressive
|
#5
|
|||||
|
|||||
![]() I agree, that is way to aggressive.
You don't have many pellets in there, but it is recommended that only the top layer moves somewhat aggresively, while the rest tumbles quite slowly/gently, so slowly that they don't move much, but pressure will build within it and you will see area turn over with time, releasing the mulm/bacteria. This is the problem with the pellets, many failures, due to the fact of the pellets not being used properly. I myself am one of them that used incorrectly in the past. I can tell you this, if used properly, they do work... I am seeing great results with them overall.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#6
|
|||||
|
|||||
![]() Rick, when you get a chance, could you maybe post a video or some pictures about how you have yours setup now? (please and thank you)
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#7
|
||||
|
||||
![]() ok thanks
thats what i was thinking i just was worried about it being stale and sitting creating a bad zone. let me go tune it down some more |
#8
|
||||
|
||||
![]() http://www.youtube.com/watch?v=C4ORW67oyxk
tuned it down some more, i dunno its hard to really fine tune it. |