Advice Required for lighting periods

Atomikk · #1 10-07-2010, 09:31 PM

I would keep the T5s off until both MHs turn off,then turn them on. Personally, i think that it is unnecessary to keep them on during the 'day'.

reefwars · #2 10-07-2010, 09:39 PM

Quote:

Originally Posted by Atomikk

I would keep the T5s off until both MHs turn off,then turn them on. Personally, i think that it is unnecessary to keep them on during the 'day'.

i agree with that also my halides are on by them selves when they are on

globaldesigns · #3 10-07-2010, 09:46 PM

I revised things a bit more, will see how that works... As I only have 2 T5's and they are actinics, I will leave them on with the Halides, as it does assist to make my lighting appear very white, not yellow as 10k's can do.

This is what I just changed it to:

T5's turn on at 9am, MH's turn on at 4PM, then turn off at 9PM, T5's turn off at 10pm

I will give this a shot and see how things reacte, hopefully damaged coral from over the summer will like it.

What do you all think, will this config work?

StirCrazy · #4 10-07-2010, 10:32 PM

I don't think saturation was a problem at all, and realy asided from a couple hypotheticle articles based of very old studys (unless there are new studdies I am not aware of) I have never heard of anyone who has had reciding corals due to saturation. my own exparaments showed that after 10 hours of intense lights I didn't benifit in growth from more light, but I didn't get corals reciding either, growth just peeked at 10 hours and I was only waisting power for 12 hours of light.

what I did was actinics turn on 2 hours then the MH come on for 8-10 hours, then the actinics stay on for 2 hours after that.

problem with trying to guess what is going on over the summer is you need to know what your temps did. 99% of the time summer problems are from temp changes.

I would start logging temps. I bought a themomitor that would record the daily high and low values and I would record them ever morning and see what was going on over a month or so.. this is what based my desision to buy a chiller.. my temp was swinging from 78 to 88 (hotter on real hot days.) after the chiller I had a swing from 79 to 81. which produced much better results in the corals.

Steve

globaldesigns · #5 10-07-2010, 10:36 PM

Quote:

Originally Posted by StirCrazy

I don't think saturation was a problem at all, and realy asided from a couple hypotheticle articles based of very old studys (unless there are new studdies I am not aware of) I have never heard of anyone who has had reciding corals due to saturation. my own exparaments showed that after 10 hours of intense lights I didn't benifit in growth from more light, but I didn't get corals reciding either, growth just peeked at 10 hours and I was only waisting power for 12 hours of light.

what I did was actinics turn on 2 hours then the MH come on for 8-10 hours, then the actinics stay on for 2 hours after that.

problem with trying to guess what is going on over the summer is you need to know what your temps did. 99% of the time summer problems are from temp changes.

I would start logging temps. I bought a themomitor that would record the daily high and low values and I would record them ever morning and see what was going on over a month or so.. this is what based my desision to buy a chiller.. my temp was swinging from 78 to 88 (hotter on real hot days.) after the chiller I had a swing from 79 to 81. which produced much better results in the corals.

Steve

Temps have never been a problem as my house is climate controlled. If anything my temp sat at 80 and never really moved day and night, and this also meant my heater never turned on as the pumps, etc did the heating. If anything, now the heater may be used more.

Good advice, I will watch the temps.

Atomikk · #6 10-07-2010, 10:43 PM

this saturation that I spoke of is called photoinhibition..

http://en.wikipedia.org/wiki/Photoinhibition

Trust me, corals can and will receede if there is too much light. I have personally witnessed this.

globaldesigns · #7 10-07-2010, 10:51 PM

Quote:

Originally Posted by Atomikk

this saturation that I spoke of is called photoinhibition..

http://en.wikipedia.org/wiki/Photoinhibition

Trust me, corals can and will receede if there is too much light. I have personally witnessed this.

Thanks for the article, I am thinking maybe that was my problem, as Kevin (Red Coral) and I have been scratching our heads as to why. Since all parameters are spot on, I am inclined to think lighting and change things.