Bioload 75 - Reef Aquarium

[bioload]

Here is a shot of the body about to be solvent welded. Nothing special....just place it on the sheet and weld.



Almost forgot.....I usually add some weight before gluing....oops "welding". Paint cans come in handy. P.S. I use Benjamin Moore.....no matter what the guys at HD say .....This was some of the cheap stuff the builder left behind.



Excuse my foam job on the door in the background....that stuff goes a long way!

Off to the router table again. After about an hour or so I cut out the tube making sure I put the bearing back on the flush bit.....it's so easy to forget. I usually place masking tape on the tube if it didn't come with any protective film, which all of the ones I've ever receive didn't have.