|
|
|
|
|
#1
11-15-2003, 12:54 AM
|
|||||
|
|||||
if you go toa lighting place (wholesale) you should be able to get a couple sockets for 5.00ish each. now if you look at the diagram thatis on the front of your ballast in your picture that tells you how to hook them up (little to small for me to see exactly, Maybe you can take a close up of the diagram) also if you go to home depot but a couple plugends with coards (about 8.00 each for Heavy Duity ones) and I have to see the diagram for sure but is each one of thoes ballast for 1 bulb or are there plugs on the back side? if each is for 1 bulb I am assuming that one coard is to plug into the wall and the other goes to the bulb. if this is the configuration you could ground both the wall plug and the lighting bracket to that ground lug.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive. 
|
Hybrid Mode
