|
|
|
|
|
#1
05-23-2010, 09:03 PM
|
|||||
|
|||||
Did the pellets ship already then? Haven't received them yet. Really hoping the TLF/MJ1200 combo works out for me.
Can you have too much flow through the reactor? I'm thinking if you get a bigger pump they *can't* clog. But maybe they won't perform right I'm not sure. 
|
|
#2
05-23-2010, 09:43 PM
|
||||
|
||||
|
I use a maxi 900 on my Kent Marine which is the same size as a TLF and the pellets seam to tumble perfectly. I also use a single piece of plastic bug screen on the underside of the top and bottom diffuser plates.
__________________
Sebae
|
|
#3
05-23-2010, 10:50 PM
|
||||
|
||||
|
Got mine going on a Lifeguard Fluidized Filter Bed as well. Mine is tumbling well but I had to do a little bit of a mod.
The holes in the bottom plate were way too small for any flow, so I cut it out and replaced it with plastic mesh. I am also using an Aquaclear 802, so I have a little more flow.   
|
|
#5
05-27-2010, 05:03 AM
|
||||
|
||||
|
Well, as expected my display tank water is cloudy after 1 day of having the pellets tumble better. The pellets didn't tumble very well for the first couple of days.
I plan to tabulate all my readings and results later in the beta testing using Excel to make it easier to see any changes in Nitrates & Phosphates.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!
|
|
#6
05-29-2010, 02:37 AM
|
||||
|
||||
|
Woke up this morning & the display tank was noticeably clearer.
Now, at 7:37pm, the tank water is almost completely clear again. Very happy about this development.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!
|
|
#8
05-23-2010, 10:52 PM
|
||||
|
||||
|
Quote:
Shipped Friday!
|
Hybrid Mode
