48" LED Array - Up and Running...Mostly

[Ron99]

Still needs a bit of extra circuitry as the Arduino puts out a 5V PWM signal and the Meanwell needs 10V. So it requires a 12V DC supply, a voltage regulator to get 10V, and a transistor that applies the 5V PWM from the Arduino to the 10V line.

Now I imagine you will ask why not just use a 10V DC supply without the voltage regulator? Most 10V AC/DC converters are not 10V. Some can be less but often they can be more; closer to 12V even. But the Meanwell dimming circuit is very sensitive and anything above something like 10.6 or 10.8 V will fry it so I want to make sure I have a steady 10V for the dimming. I may also use the same 12V converter to supply 5V with a voltage regulator to power the Arduino too rather than have a separate 5V supply for that.