|
|
|
|
|
#1
02-16-2010, 03:18 PM
|
|||||
|
|||||
Did you acctually change anything on the fixture itself, or just move the plugs around? Try plugging the fixture directly into a wall outlet. 1 cord at a time, seeing if the respected bulbs will light up or not.
__________________
Dan Pesonen Umm, a tank or 5 
|
|
#2
02-16-2010, 03:31 PM
|
||||
|
||||
|
All i did was move some plugs around. didnt touch the fixture at all. going to try a different power bar or something tonight. wondering if its possible something is wrong with the fixture itself though...
|
|
#3
02-16-2010, 03:40 PM
|
|||||
|
|||||
|
I would try a different power bar. Pretty hard for something 2 be wrong with the fixture as they are 2 completely separate wired light systems in it.
__________________
Dan Pesonen Umm, a tank or 5
|
|
#4
02-16-2010, 04:19 PM
|
|||||
|
|||||
|
I've seen a few similar cases with those fixtures. I don't think you problem is related to your power par, probably just a coincidence. Could be a bad connection or possible a bad ground but it seems obvious to me it's in the fixture.
|
|
#5
02-16-2010, 04:27 PM
|
|||||
|
|||||
|
He moves some plugs around on the Power bar and it's obvious it's in the fixture?
It very well could be, but I fail to see how it is Obvious.
__________________
Dan Pesonen Umm, a tank or 5
|
|
#6
02-16-2010, 10:41 PM
|
||||
|
||||
|
Ok, so a different power bar didnt work.. and now the 2 bulbs wont work at all. :-( do you think its something loose in the internal wiring? ballast problem? bulbs?
|
|
#7
02-16-2010, 10:45 PM
|
|||||
|
|||||
|
take all the bulbs out and put them all back in. I have had bulb placement/seating problems with T5s before. Good luck.
Also, rotate the order of the bulbs. Could be a bad bulb? K.
|
Hybrid Mode
