![]() |
|
#1
|
||||
|
||||
![]() no expert but my sps is growing and from what you posted i would agree phos is high and you need more light also imo higher quality bulbs than the stock ones seems to have made a difference for me
__________________
My 55 Gal Reef |
#2
|
|||||
|
|||||
![]() Thats a lot of fish for a 90 are you sure you have no NO3
I only have 3 fish small ones in my 75 and I show 0.2 of NO3
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#3
|
|||||
|
|||||
![]() Are you sure your lights are T5's? 65w sounds like PC to me.
__________________
60" 120G project-DONE!!!! |
#4
|
|||||
|
|||||
![]() If they are PC's you don't have enough light.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#5
|
||||
|
||||
![]() PC I'm assuming that this is power compact. This is what I have. Sorry for misleading everyone quoting T5's. I though there were the same.
|
#7
|
|||||
|
|||||
![]() Does not look like bleaching to me it looks like a water quality issue.
How old and what kind of test kits do you run? I think your problem is there it is unusual to have that high a PO4 and no NO3
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#8
|
||||
|
||||
![]() I'm running API Test Kits I have had them for 8 months plus however long they were on the shelf. I re-tested P04 and NO3 and have the same results. So is this a lighting issue, water quality or both?
|
#9
|
|||||
|
|||||
![]() You don't have enough lights for SPS and barely enough for LPS especially if your bulbs are older than 6 months. Looks like an excuse to upgrade T5's or M/H
![]()
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. |
#10
|
||||
|
||||
![]() Ok, thanks for your help on this........ Next one........please. I attached another pic of the lighting area I have (in original post). It is very limited as the aquarium is built in to a finished cabinet. There is a measurement for height, total length available is 48 inches. Is there something I can put in this space that will work or should I just tear everything down and start over with a proper sump, tank, complete entire set-up, build a new cabinet, LOL!!
|