Bubble Magus NAC-6A Skimmer

Ron99 · #1 01-11-2010, 01:11 AM

Yes, it's an Atman pump. the problem is that sometimes the meshwheels bind and then the impeller won't turn. Mine was very moisy and then stopped running. I temporarily removed the lock ring from the front of the pump to reduce the pressure on the impeller and it runs silently at the moment but I'll need a to swap in a good impeller so I can run it with the locking ring on.

mark · #2 01-11-2010, 02:13 AM

skimmer is nice.

see you mentioned dosing pump, which one, what do you think of it?

Ron99 · #3 01-21-2010, 11:05 PM

So it has been running for 12 days and has been pulling some nice yucky stuff out of the water:

Eeewwww, smelly!

So I'd say it's working fairly well.

Ron99 · #4 01-21-2010, 11:06 PM

Quote:

Originally Posted by mark

skimmer is nice.

see you mentioned dosing pump, which one, what do you think of it?

Sorry, missed the question. It's the Bubble Magus dosing pump but I haven't set it up yet. Looks nice and it powers up and runs on manual mode.

Coleus · #5 01-28-2010, 01:48 AM

How long does it take to collect full cup?

Ron99 · #6 01-28-2010, 04:29 AM

My tank is lightly stocked so about 6 or 7 days to fill it. It skims fairly dry.

Chase31 · #7 01-28-2010, 04:58 AM

doesn't look like its working very well, your going to have to donate it to me

Ron99 · #8 01-28-2010, 04:15 PM

Quote:

Originally Posted by Chase31

doesn't look like its working very well, your going to have to donate it to me

Well I would, but getting it out of the sump is a bit of a pain. I have a used Coralife 65 I can send you