|
|
|
|
|
#1
01-09-2010, 07:15 PM
|
||||
|
||||
Just peel it off the rock. start at an edge ad once you get it going it comes off pretty easily. Any piece will start a new colony even as small as an arm. It's just about impossible to kill. I usually tie it loosely onto a base(if you tie to tight the string will cut right thru). You can also push a piece of toothpick thru and use glue to attach each end of the toothpick to the new base. You can also put a small piece of rubble against the collony and once it attaches seperate it.
__________________
72 gal bowfromt mixed reef sps dominated, 25 gal mineral mud type sump/refugium Skimmerless 2x250 14000k phoenix hqi 2x96 pc actinic, 50x flow 
|
|
#3
01-09-2010, 08:24 PM
|
|||||
|
|||||
|
The easiest method I found was cut off a piece and set it on a small piece of rubble rock. Loosely wrap the rock with finer mesh material and hold this on the rock with a rubber band. The xenia was attached in 1-2 days after which you take off the mesh. I tried using just a rubber band but found this method that much more effective and easy.
|
|
#4
01-09-2010, 09:45 PM
|
||||
|
||||
|
Fragging this guys didn't even require much work for me. I was trying to make mine crawl from the frag plug into my rockwork, somehow one of my snails knocked the frag plug when it was only halfway into the rock and left the plug dangling and somehow I guess the xenia just decided to split itself. So now I have 3 the one in the plug, one in the rockwork and the third is in a piece of rubble that fell of with a blob of xenia flesh attached to it and has started forming heads.
|
|
#5
01-09-2010, 09:54 PM
|
|||||
|
|||||
|
Frag of the month - Propagation of Xenia sp.
http://reefkeeping.com/issues/2007-04/fotm/index.php
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour
|
Hybrid Mode
