![]() |
|
#1
|
||||
|
||||
![]() i dont have a rubbermaid big enough, possible to rearanged the rock and bring water to 1/3. theres no stress on the tank atm its not bowing anymore then its supposed to. but get it all cleaned and dry redo leave 7 days then fill again? 7 days wow wish that information was shared with me. its a 46 gallon and its not euro just a 1/4 inch glass cross brace i broke mine like a dumb ass lol.
|
#2
|
||||
|
||||
![]() buy a rubbermaid tomorrow. Then transfer everything to it. You need the tank dry and without any stress in it for it to fully cure and for you to fix the brace.
|
#3
|
||||
|
||||
![]() do i need to transfer the sand to?
|
#4
|
||||
|
||||
![]() If you are saying the silicone that is sealing the tank is still sticky, take everything out of the tank and let it dry.
|
#5
|
||||
|
||||
![]() the tank itself is fine its not a custom tank only brace the plastic trim broke and i had a glass brace put in
|
#6
|
||||
|
||||
![]() Ohhhh k
Then make sure that all the old silicone for the brace is gone. and get a new brace cut, same size as the old and silicone it in again. Make sure the part where the brace is going in is dry and clean. You could put some alcohol on a cloth and wipe that area well. Then let it completly dry for a week |
#7
|
|||||
|
|||||
![]() What part of town are you in? I have a 33gallon you could borrow to get you by for the next week or two until you can get your tank fixed.
__________________
Robb |