#1
|
|||||
|
|||||
PC lighting to fit 23" area
Ok,
I have an Eclipse 2 hood for my 20g reef setup.. recently the dumb stock light blew on me but they are shipping a replacement . Unfortantly I am out of a light right now. I want to build something to fit into this Eclipse hood, the width is maybe 4" max with a length of 23" or so. Does anyone have a recommendation on what I can use? BTW, looking to max out the wattage if possible.. without going overboard Thanks Chad |
#2
|
|||||
|
|||||
I believe CSL has a retro fit kit which fits the eclipse 2 perfectly.
__________________
Noel This is a LOCAL reef, for LOCAL people. We\'ll have NO trouble here. |
#3
|
|||||
|
|||||
Quote:
thanks Chad |
#4
|
||||
|
||||
I never liked the retro fit stuff. I always ended up building a top canopy out of wood. Doesn't take long if you have the tools and you keep it simple. Then you could even hide a MH in there with a pair of vent fan. ROAR.
__________________
----------------------- -Wilty |
#5
|
|||||
|
|||||
Quote:
Would a 55/65W PC lamp not fit in there? Otherwise, the 38/32W PC lamp should. |
#6
|
|||||
|
|||||
I was thinking of getting this..
http://www.jlaquatics.com/cgi-bin/sh...no=pfo-pfbel12 The 2 x 55w one not sure if its the most cost effective tho.. whats do you guys think? Chad |
#7
|
|||||
|
|||||
That looks OK, but a Workhorse 5 will run 2x55 PC (I have that running over a 20), and it must be at least a little cheaper.
__________________
---------------------- Alan |
#8
|
|||||
|
|||||
Quote:
The metal feet will be gone once I complete my hood. Right now it is resting on a glass lid. Chad |