Securing 1/2" pvc inside dry rock?

[lastlight]

You're onto something there. I will do the pvc for the larger pieces and maybe toss some zips in somehow. Then use zips for the smaller ones.

[blake374]

I just used gravity to hold the rocks on place. each rock rests on the rock below it. I have heard of zip ties being used though.

[KrazyKuch]

I would make sure that the zip ties you use have the nylon tab that holds it together instead of the standard metal tab you can get

[lastlight]

I used various lengths of the black MARR zips from HD. 100% plastic.

[Lance]

Why do you think the PVC rods will come out Brett? With the rock stacked on top of each other and the rods through the holes it should stay together. I made a 20" tall tower in the 90g this way and it is rock solid.

The tower on the right: Kinda hard to see it well because of the corals.

[lastlight]

I definitely don't think that now. I drilled all my holes to be EXACT fits. The pvc is really stuck in place. I only used some epoxy to deal the top hole to keep creatures out. I have 100% faith in the pvc.

[Lance]

Originally Posted by lastlight

I definitely don't think that now. I drilled all my holes to be EXACT fits. The pvc is really stuck in place. I only used some epoxy to deal the top hole to keep creatures out. I have 100% faith in the pvc.

Yeah I'm sure it will be fine. Your rock is quite flat as well and should not be a problem.

[ZachAttack]

could someone explain the whole zip tie thing a bit better?? I understand the epoxy and the rods, but how do you use zip ties?? Im confused about that. wouldnt you see them?

[lastlight]

If you spend many hours strategically drilling holes near contacting points in choice locations you can neatly hide all your zip ties. I couldn't really see any in my old setup.

Makes a really big mess...I did it right in the middle of my living room lol.