![]() |
|
#1
|
|||||
|
|||||
![]() How old is the unit? If its still under warranty, contact coralife...they are usually really good about replacement parts.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |
#2
|
|||||
|
|||||
![]() It's not that old but I bought it from another reefer so I'm not sure if it would still be under warranty. Is there someway to check?
__________________
250 gal display tank plumbed directly to my wallet |
#3
|
||||
|
||||
![]() Tough to say whether you'd get warranty.
I know that when I opened my fixture up, it was a fire ready to happen. Several of the connectors had already burned through and were holding by a thread. I'm surprised that mine was still firing.
__________________
Mark... ![]() 290g Peninsula Display, 425g total volume. Setup Jan 2013. |
#4
|
||||
|
||||
![]() I found loose wires on my 150W. So I went through all the wires and tightened them all up and haven't had a problem for 1 and a half years
__________________
150 G mixed reef. ![]() |
#5
|
|||||
|
|||||
![]() I went through mine as well. Actually I'm very impressed with the wiring and the connections. Everything is tight and all the wiring connections were crimped and then had electrical shrink wrap put on them.
How does the ignitor work in conjunction with the ballast. I thought it was the ballasts job to fire the bulb. What does the ignitor do ![]()
__________________
250 gal display tank plumbed directly to my wallet |