![]() |
#11
|
|||||
|
|||||
![]() So I'm sitting here looking at my fancy schmancy new tank and decided that it would really suck if it exploded. Thus I decided to install a GFCI. I know I should have done this at the start, and I intended to but for some reason it fell off my radar. Okay, so there are a lot of options. Buy a GFCI outlet and replace the main one in the wall with the GFCI. Or do I buy one of those GFCI powerbars ?? Lucky for me my dad had a GFCI outlet kicking around that he wasn't using. I was going to replace the wall receptacle with it but then decide that it would be nice to maybe leave the wall the way it is, and run a line under my tank and maybe use a GFCI powerbar instead.. Well, then it hit me. Why not make my own!
I ran out and picked up some supplies. A cable and a 3 prong plug, outdoor electrical box and weather proof cover. ![]() ![]() It was quite easy actually, and everything came with instructions. First I stripped one end of my waterproof wire for the plug. ![]() Then openned up the plug and inserted the appropriate wires into their respective slots. ![]() ![]() ![]() So now we have a plug. ![]() I siliconed the base of the plug (where the wire inserts into it) for good measure. Next I ran the other end of my cable into the electrical box where my receptacle will go. ![]() Insert said receptacle and attach the wires as per the instructions from the receptacle. ![]() ![]() Screw in the receptacle. ![]() Now we put on the weatherproof box. ![]() Attach the cover to said weatherproof box. ![]() Voila! one GFCI power outlet. Not quite a powerbar but anything I plug into it, including a power bar or two will be GFCI'ed. Incidentally I have two powerbars that I will be plugging into it. I plugged it in to make sure it worked of course. Orange light means it has tripped. It comes this way. Press the reset button to reset/untrip it. ![]() Plugged my 'fuge light into it and we have power! ![]() The whole process was actually quite simple and didn't take very long at all, except for having to pause after each step to take those darn pictures. |