Durso Question

JDigital · #1 07-05-2009, 01:41 AM

Have you thought about going with a Herbie system instead?

mark · #2 07-05-2009, 02:36 AM

Quote:

Originally Posted by JDigital

Have you thought about going with a Herbie system instead?

two bulkheads in the same overflow, definitely consider a Herbie. Personally been in front of 2 high flow (1900 and 2000ggph) systems and have to say truly silent. Here's a drawing from rban on RC that shows the idea. About the only changes to it would be suggest a gate valve (easier to adjust) and just leave the secondary dry.

Eb0la11 · #3 07-05-2009, 04:53 AM

That picture isnt in my tank but I do have two drains. I have 2" drains. Not sure if Im going to cut them down to 1.5 with limiting plumbing but that is the size of my bulkheads, so if I do ever want 30x turnover I can do it.

Does anyone have an article describing the build of each? Im only partially educated on the two designs but it sounds like a Herbie is better and I'd like to just do it right the first time if I can. Is a Herbie simple to install?

fishytime · #4 07-05-2009, 05:00 AM

If you look at the first couple pages of my tank journal thread, there are fairly detailed pics of all the parts and the plumbing. It is really a stupidly simply design,but silent and virtually foolproof. If you have any questions feel free to pm me.

lucyw · #5 07-05-2009, 05:12 AM

"Bow Valley Aquatics.
Mine will be done on Monday and I can let you know how it goes.

He has all the plumbing parts you need at the shop as well - not to mention a 3 foot grand cayman alligator in a massive tank just to show off how good he is."

It sounds like you could have got your questions answered from these guys.

L

Eb0la11 · #6 07-05-2009, 06:09 AM

Quote:

Originally Posted by lucyw

"Bow Valley Aquatics.
Mine will be done on Monday and I can let you know how it goes.

He has all the plumbing parts you need at the shop as well - not to mention a 3 foot grand cayman alligator in a massive tank just to show off how good he is."

It sounds like you could have got your questions answered from these guys.

L

Yeah, Im just gathering multiple opinions so I can form my own for what works best with my situation.

Eb0la11 · #7 07-05-2009, 06:17 AM

Quote:

Originally Posted by fishytime

If you look at the first couple pages of my tank journal thread, there are fairly detailed pics of all the parts and the plumbing. It is really a stupidly simply design,but silent and virtually foolproof. If you have any questions feel free to pm me.

How can I navigate to your build thread? I checked out the links in your sig and saw your tank of the month, which is gorgeous I might add, but not a build thread?

fishytime · #8 07-05-2009, 02:56 PM

Quote:

Originally Posted by Eb0la11

How can I navigate to your build thread? I checked out the links in your sig and saw your tank of the month, which is gorgeous I might add, but not a build thread?

Here you go http://www.canreef.com/vbulletin/showthread.php?t=40669

Eb0la11 · #9 07-06-2009, 10:54 PM

Ok, so I got word from the shop I can pick up the tank tomorrow so I need to figure out my plumbing sorta soon. Not really super soon because I am actually gone all of next week and potentially wont begin filling/plumbing this beast until around the 19th but we'll see how this week goes if I have time to get live rock curing in the tank or something. It'd be nice.

Anyways, so for a herbie theres just two pipes, one is a standpipe, one is submerged straight pipe right? The submerged takes 95% of water by fine tuning its drain amount with a gate valve and then the other 5% is through the standpipe right? This will make no sound? I guess that 5% just runs down the side of the pipe and makes no sound, correct? I have 2" drains which should easily handle the drainage if one gets even completely blocked

I read this article about it: http://dinardiengineering.com/blog/?p=34 and looked at Fishytime's pics.