Sump Baffles

[Palster]

Originally Posted by Skimmin

I have built a few sumps now and with a "Herbie" style drain baffles are not really required. The only important baffles in my opinion are the ones that separate your skimmer from the rest of the sump. Without these you cannot keep your skimmer in a constant level of water which I feel makes the skimmer run less efficiently. Also if your skimmer is not recirculated it may be more prone to sucking up 'critters' without a separate skimmer chamber/compartment. Just my two bits.

I absolutely agree with what Skimmin said. The first sump that I had did not have baffles and I could never get my skimmer adjusted properly because the water level was constantly changing and unless you have some kind of auto top off hooked up to your sump the water level is never going to be constant. Even with an ATO it will still vary enough to cause fluctuations with most protein skimmers. Personnaly I would always want to have baffles in my sump even if the flow was low enough not to cause micro bubble issues.

[Dez]

How much would you set aside for a skimmer compartment to be compatible with most skimmers? Do most people put their skimmers in the area where the main tank drains into? Thanks for the responses so far.

Des

[Myka]

The skimmer space depends on the size of your main tank. With your sump being 75g I imagine your display tank is fairly large. 14x14" is usually enough space for a skimmer up to about 250 gallons, but that's really squishing it in.

[mike31154]

Do most skimmers have to be run in the sump? When I set up my basement sump in the future, I was planning on keeping the skimmer external. Any major concerns about doing this? Sorry, don't mean to hijack the thread, but I'll be building a sump with a used tank(s) as well, so tagging along. Also with regard to the skimmer, I'd like to feed it strictly from existing plumbing (no extra pump), it will be a simple air stone, counter current DIY job. Keeping it external & in the basement, I should be able to make it six feet tall if I want, no?

[Dez]

Skimmers don't have to be run in sump. I've run external skimmers before, but for me, it's just peace of mind if I have skimmer failure, that it'd be either in the sump or over the sump. Anybody have some pictures of baffle designs that have worked really well for them that they can post? Thanks.

[Lance]

I have fairly high flow through my sump and run a fairly large skimmer (MR3), and without baffles, microbubbles would definitely be a problem. My skimmer is external but over the sump, so it doesn't take any room up yet there is no fear of a flood. My sump is 70g tank with a return section (13g), refugium (20g) and drain section (20g). The drain section and refugium have live rock in them.

[Rbacchiega]

Dez, check out Melev's reef...he's got loads of different sump designs. I'm sure you'll be able to find one that suits your needs.