Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

Reply
 
Thread Tools Display Modes
  #1  
Old 05-02-2009, 04:08 PM
plutoniumJoe's Avatar
plutoniumJoe plutoniumJoe is offline
Member
 
Join Date: Oct 2008
Location: Vancouver
Posts: 283
plutoniumJoe is on a distinguished road
Default

I have a GFCI on my tank and feel better knowing that it is there but I wonder if I am defeating it's purpose by also having a UPS. I have just my power heads plugged into the UPS so if the GFCI trips or the power goes out I have some flow for a while. My question though is about the UPS preventing the GFCI form tripping if the ground fault results from one of the power heads plugged into it?
__________________
210 Gallon slowly gaining population.

Foxface, Naso, Coral Beauty, 2 Clowns, 2 Chromis, Orange Anthias, and Striped Goby.
Reply With Quote
  #2  
Old 05-02-2009, 04:29 PM
JTaylor420 JTaylor420 is offline
Junior Member
 
Join Date: Apr 2008
Location: calgary
Posts: 22
JTaylor420 is on a distinguished road
Default

hey midgetwaiter, you name 1 electrician that has never been shocked at work. Sometimes it is necessary to keep power on the circuit while working on it, needless to say i've moved wires or had them brush against me (being live wires) with not even feeling a thing. Anyways i'm just putting in my 2 cents on the subject take my opinion's for what you think their worth and use it or not. And about the gfi's in house's now like i said in my original post gfi's are great just not for fishtanks. Stop trying to look big like i said i'm not starting a debate here if you have nothing intelligent to counter my side of the argument dont waste your time.
Reply With Quote
  #3  
Old 05-02-2009, 05:59 PM
fkshiu's Avatar
fkshiu fkshiu is offline
Member
 
Join Date: Sep 2005
Location: Vancouver, BC
Posts: 1,499
fkshiu is on a distinguished road
Default

Quote:
Originally Posted by JTaylor420 View Post
hey midgetwaiter, you name 1 electrician that has never been shocked at work. Sometimes it is necessary to keep power on the circuit while working on it, needless to say i've moved wires or had them brush against me (being live wires) with not even feeling a thing. Anyways i'm just putting in my 2 cents on the subject take my opinion's for what you think their worth and use it or not. And about the gfi's in house's now like i said in my original post gfi's are great just not for fishtanks. Stop trying to look big like i said i'm not starting a debate here if you have nothing intelligent to counter my side of the argument dont waste your time.
I believe that a GFI saved my life. Like a lot of these things it all started out very routinely and innocently. I had cleaned my extermal return pump and started it back up again. It was making a funny sound so I simply started to poke around the pump and tapped at the volute while leaving the pump on. After a couple of taps the volute began spraying jets of water in my face and all around me. Like many people I have some powerbars under the tank. They are not sitting on the ground but are screwed into place with drip loops. When I finally stop the water I was kneeling in a large pool of salt water along with the soaked powerbars. In my panic I had flailed around and accidentally grabbed onto the powerbars several times. The GFCIs had tripped like they were supposed to. I felt nothing and there wasn't even a spark. My tank powerheads which are on a separate GFCI protected circuit kept running like nothing had happened. It turns out that I had not properly seated the volute into the pump which was the caused of the near disaster.

The important part of this is that I don't believe I would have qualified for a Darwin Award. I was doing something I've done numerous times before and did not believe I acted unreasonably yet something really bad almost occurred. I can think of a myriad of instances where someone is fiddling with something around their tank and something similar happens. For example, if you are fiddling with your lights above the tank and for some reason they fall into the tank. SW and electricity in such close proximity to each other is inherently risky. If you have young curious young children or pets the danger increases tenfold.

On a related note a firefighter friend of mine said that whenever they trace the cause of a fire back to an aquarium it's almost always a SW aquarium with no GFCI protection. This is probably because of the rat's nest of powerbars and wires that are under SW tanks and the fact that SW is a wonderful conductor of electricity. All it takes is for a few drops of SW to splash onto a powerbar to cause some sparks and away we go. GFCIs would prevent this. He says he's seen a lot of examples of a mass of powerbars melted together underneath SW tanks.

Last edited by fkshiu; 05-02-2009 at 06:09 PM.
Reply With Quote
  #4  
Old 05-02-2009, 06:18 PM
hillegom hillegom is offline
Member
 
Join Date: Nov 2008
Location: Surrey
Posts: 1,998
hillegom is on a distinguished road
Default

If some people are worried about one GFCI turning off all power if it trips, then why not run two GFCI's.
Behind my tank I have one outlet for my 50 gal. When I am going to change to my 120, I will add another outlet and have two GFCI's. That way, All functions in the tank will not go out at the same time.
Reply With Quote
  #5  
Old 05-02-2009, 06:54 PM
midgetwaiter midgetwaiter is offline
Member
 
Join Date: Nov 2005
Location: Calgary
Posts: 546
midgetwaiter is on a distinguished road
Default

Quote:
Originally Posted by JTaylor420 View Post
hey midgetwaiter, you name 1 electrician that has never been shocked at work. Sometimes it is necessary to keep power on the circuit while working on it, needless to say i've moved wires or had them brush against me (being live wires) with not even feeling a thing. Anyways i'm just putting in my 2 cents on the subject take my opinion's for what you think their worth and use it or not. And about the gfi's in house's now like i said in my original post gfi's are great just not for fishtanks. Stop trying to look big like i said i'm not starting a debate here if you have nothing intelligent to counter my side of the argument dont waste your time.
My Dad was an electrician, I learned a lot from him, like how to handle live wires when fixing something. I work on computers, I have had a 2000Va UPS and a 17" CRT shock me. I understand electricity very well.

Somebody needs to "look big" and correct the dangerous info you are putting out there, the presence of water is a game changer and you need to realize that. You might not take much of a hit brushing up against 120 in the normal course of things but try it in socks with a wet (SW wet especially) hand, then see what happens.

You can confirm this by referencing any junior high science text book.
Reply With Quote
  #6  
Old 05-02-2009, 08:10 PM
mark's Avatar
mark mark is offline
Member
 
Join Date: Nov 2002
Location: Edmonton AB
Posts: 4,212
mark is on a distinguished road
Default

What's bothering me here is the "I'm an electrician, therefore an expert so listen to me crap on the use of GFI".
Reply With Quote
  #7  
Old 05-02-2009, 11:28 PM
Binare's Avatar
Binare Binare is offline
Member
 
Join Date: Dec 2008
Location: Calgary
Posts: 262
Binare is on a distinguished road
Default

Quote:
Originally Posted by mark View Post
What's bothering me here is the "I'm an electrician, therefore an expert so listen to me crap on the use of GFI".
Hope I havent caused that feeling Mark I'm the "Electrician" who started this post. I am no expert on GFCI.

Personally, I could care less what everyone decides to do with there tanks. This little debate has made some people think.. which is a good thing, others well... some interesting comments have come up to say the least.... and others i seriously find offensive coming from "electricians", its about I can take to end up going on a rant about one certain person in this discussion whos comments make me wonder how much experience they actually have. Hopefully I can leave it that... hopefully everyone knows good advice and bad advice.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 03:48 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.