FS: Deltec Aquabee 2000 PW pump

[Skimmerking]

What's the GPH

[imisky]

its 2000L/H
oh and its a pin wheel not a needle wheel sorry about the confusion

[Funky_Fish14]

FWIW - my Deltec has the pump imisky is upgrading to (the pump he is selling is basically the same, I think the impeller is just slightly different, or the size of coils) and it is an impressive little unit. Cant believe how much it pushes, and really low watts! I think they only use 20w.

Chris

[imisky]

the 2000 and 2000/1 are the same pump, the difference is the impeller and the max head height it can get to. the impeller got changed to a single piece impeller (impeller + shaft are 1 piece) while the old one (2000) are 2 seperate pieces. the AB2000 has a 1.6m head height and uses 18W i believe. the AB2000/1 has a 3.0m head height and uses 18W as well, i dont know what they changed for the head height increase.

The deltec PW version draws less watts too i believe around 12W instead of 18W which is a plus!

[Funky_Fish14]

Thats some pretty good horsepower outta the aquabee then, considering a 20W maxi-jet 1200 only does about 3.5ft (1.1 ish meters) head.

[gobytron]

I just ordered an aquabee 2000/1 from aqua digital...
I had to look everywhere for one, where are you getting your 2000/1 from?

[imisky]

the aquabee will be bought from the deltec distributor in canada. I was contacting them regarding tunze replacement parts and a new impeller and shaft for my AB2000 when i decided, why not just get a new one. I dont know if that is the cause of the slight popping noise (as i cant see any ware on the AB2000 impeller), but i thought it would give it a try until i just decided to buy a new one. none the less the pump still performs great for my MCE600 even with the slight pop so i dont know whats causing it.

Still available, if anyone is interested the pump will be available after i recieve my AB2000/1