Project 187G

[Red Coral Aquariums]

Originally Posted by JDigital

Josh on your outlet from your overflow you have 6" at the bottom. For your overflow holes you will need at least 2" between the holes and from the edge of the piece of glass. So if you are going with a 2" Bhead hole is 2 3/4" and 1 1/2" Bhead emergency hole is 2 1/4" making it 2" + 2 1/4" + 2" + 2 3/4" + 2" = 11 inches. Sorry I should have caught this earlier in your drawings.
Kevin

[JDigital]

Originally Posted by Red Coral Aquariums

Josh on your outlet from your overflow you have 6" at the bottom. For your overflow holes you will need at least 2" between the holes and from the edge of the piece of glass. So if you are going with a 2" Bhead hole is 2 3/4" and 1 1/2" Bhead emergency hole is 2 1/4" making it 2" + 2 1/4" + 2" + 2 3/4" + 2" = 11 inches. Sorry I should have caught this earlier in your drawings.
Kevin

I should have caught that too!! Thanks Kevin..

[Red Coral Aquariums]

Start your overflow angles from the top of the overflow, you don't need to go straight down that 8".
Kevin