#11
|
||||
|
||||
Thanks Codfather, but I meant the sump in post #2 from Starry
|
#12
|
|||||
|
|||||
Ya, i kind of figured it out after i set it.
Bob |
#13
|
||||
|
||||
hehe the sump input line is hidden behind the skimmer and is inside that 3" pvc pipe with the holes in it. (helps reduce micro bubbles)
|
#14
|
|||||
|
|||||
This is the perfect reason why people should not post after 6 beers, well at least i shouldn't.
|
#15
|
|||||
|
|||||
Sure...The sump is 48"x18"x12". the fuge section is 18.5" with a 15" tall baffle....in hindsight I should have made it 14" or so because the 6" drop of water into the return section creates bubbles that occasionally get sucked into the return pump. Not a huge deal but I have to pile up some lr around the return intake to break up the bubbles before they get dispersed in the display. The skimmer section is 12.5"( just big enough for my skimmer) and the baffles are 9" tall.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694 |