Quote:
Originally Posted by Mr OM
It's a bit of an issue, if we get the Dart to run full capacity then likely your overflow will not handle it, I would plumb 1 1/2 all the way to the surface then tee off the 1 1/2 pipe to get a total of four 3/4 returns, send 2 to the bulkheads and the other two would have to go over the top. when it comes to volume you need four 3/4 outlets to handle that pumps capacity
you may have to throttle back the pump to keep the sump from draining, and the tank from overflowing
|
Close Mr OM good catch, Each of the two 3/4 " lines need to come off the 1.5" pipe. I just noticed that it was reduced to 3/4" after the TU Ballvalve coming out of the pump. Sorry Prazil I should have caught that on your Feb. 26th update. LMK how I can help to switch it.
Kevin
03-03-2009, 05:32 AM
Threaded Mode
