Ghl Profilux Discussion And Support Thread

[bullit67]

Ok i know this has been asked befor but I moved my sump down to the basement I now need to move the the controller down stairs BUT I need to have power bars upstairs for my lights can I use a standard rj11 phone cable to make the longer run if so how long of a run can I make if not how long of a cable can I get for the porfilux.

Thanks
Doug

[Aqua-Digital]

VSL-5 cable can be dasiy chained to 50'

[Gordon H]

I have a Profilux II Plus controller and I want to mount it on a wall. At one time I understood that Profilux was going to make one -then they decided against it. If anyone else has mounted it on a wall, can they tell me how they did it?

Thanks in advance,
Gord.

[Tom R]

Hi Gordon

I have seen a small shelf made with L brackets. The shelving material pulled forward about an inch and a half from the wall for plugs and connection cords to come off the back of the ProfLux and fall toward the floor. I have installed mine on top of a small cabinet that is pulled away from the wall about the same distance as the shelf described above.

Tom R

[Gordon H]

Hey Tom,

Thanks for you reply. That sounds like a great solution for mounting horizontally. I am trying to mount mine with the bottom flat against the wall so that the display is pointing up toward the ceiling and the cords are pointing down toward the ground. Any thoughts?

Cheers,
Gord.