Depends on how thick the glass is and how old it is (the older glass gets the harder it is to cut) up to 1/4" is easy to cut and you can get yourself a cutter for a few bucks at any hardware store (or 30-40 bucks for a good one) get some scrap glass and practice. A little drop of oil on the cutter and smooth even pressure you run the cutter where you want to cut and then snap the glass off at the cut line. Most glass shops are unable to cut the thicker glass (1/2"+) it is usually done by specialty shops. Best thing to do is call your local shops and ask what they can do for you. PS if the glass is tempered it can not be cut.
|
01-13-2009, 07:02 PM
Threaded Mode
