|
|
|
|
|
#1
08-10-2008, 05:39 PM
|
||||
|
||||
I use the Tunze 6101's and 6055's. If you plan on using a controller, these integrate perfectly into the Profilux and you don not need the Tunze controller.
As said though, you cannot go wrong with either.
__________________
400g SPS tank + 75 LPS tank Remote 90g + 65g sump. 
|
|
#2
08-10-2008, 06:07 PM
|
||||
|
||||
|
I'm using two 6101 tunze connected to my Profilux, I have the decor rocks for both of them so I get wicked flow and you can't see them.
I was thinking of swapping them out for the 6055s becuase I've moved down from a 120g to a 75gcube.
__________________
75g 24x30x24 w/external overflow 35 sump/fuge 250w Ice Cap MH with Radium 20k & Luminarc Reflector PS4 Return -PCI Chiller - WavySea 2 x Tunze 6101 H&S A150-2001 2 x Deltec Reactors Carbon/Phosban Profilux Plus II
|
|
#3
08-11-2008, 08:24 PM
|
|||||
|
|||||
|
I'm using a Vortech MP40W on my 45g tank. I think if you go with vortechs u need one for every 60g to get the most benefits. Tunze's are better for large tanks I think (200g plus or 8' and longer). The vortech doesn't have much strength 3' away from the powerhead in the water.
__________________
Everything I put in my tank is fully dependant on me. Last edited by kwirky; 08-11-2008 at 08:26 PM.
|
|
#5
08-12-2008, 02:13 AM
|
||||
|
||||
|
Thanks for your opinions and info on the pump. My tank is only a 72 gallon and from what i have read and seen in video i am sure it will be more than sufficient. I had a hydor 4 which just died for some silly reason after 7 months so instead of replacing it i will invest in a better pump.
|
Hybrid Mode
