|
|
|
|
|
#1
07-24-2008, 09:14 PM
|
|||||
|
|||||
so you think I could adequately cool and heat the tank with only 150 gph running through it?
I have the sump set up with a fan already as well as a heater.. I am just worried there is not enough flow to cool and heat the tank properly. Also, this would be run off of a temp controller.. the sensor would be best placed in the main tank I would guess then.
__________________
Chad 
|
|
#2
07-25-2008, 09:04 PM
|
|||||
|
|||||
|
I don't think you can do it. I run close to the same setup and I was bumping the temp up by 4* in about 3 hrs of having the lights on.
I also run more flow through my tank. I had to pick up a chiller now it is rock solid best money I spent it's nice not to worry about heat fluctuation. I also added a ATO as I had to put in at least a gallon a day.
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return.
|
Hybrid Mode
