|
|
|
|
|
#1
06-11-2008, 01:20 AM
|
||||
|
||||
The Baffles will be 4" wide bumping them up to 6" would help i guess? The one pump with T is a good idea. I wonder if putting a T that low to the pump would cause the pressue to lower a lot? I am going to have an autotopoff so i am not too worried about evaporation. For a 1000GPH pump what size would you reccommend for a return chamber.
|
|
#2
06-11-2008, 02:37 AM
|
|||||
|
|||||
|
Have you checked out Melev's designs? Just thought it might be able to give you a few ideas.
http://www.melevsreef.com/allmysumps.html http://www.melevsreef.com/55g/55g_sump.html diy from a 20g: http://www.melevsreef.com/acrylics/s...ass/index.html
__________________
120g build thread 48g-upgraded to 120g old pics old 48g build thread Pics.... more recent pics seahorse pics
|
|
#3
06-11-2008, 03:54 AM
|
|||||
|
|||||
|
With a sump and return pump of that size you are probally going to want to divide it into 1/3 sections for each chamber which will give you about 7 gallons per section. Also go with 1 pump and a t to the fuge or do a t off of your overflow into your fuge. Make sure that your first baffle from the skimmer chamber has the water going under it and not over, you will have way less issues.
|
Hybrid Mode
