VERY custom tank builders in Calgary?

[wickedfrags]

Lets here more about your tank now

My display is 72"l x 26"w x 24" high - 12mm starphire on the three viewable sides. I do not use standpipes, and do not see the issue with drilling the bottom of a tank.

Originally Posted by mccrat

I do have pretty detailed drawings and yes have found that some just like to do it 'Their' way and are very opinionated. I have some good resources now and hopefully will find someone to build it the way I want. Here is a link to Brian's build thread on reefcentral. It is very similar to what I want. When I start my build I will start a build thread here for you all. Thanks so much!

http://www.reefcentral.com/forums/sh...5&pagenumber=1

Theresa

[Marlin65]

Originally Posted by wickedfrags.com

Lets here more about your tank now

My display is 72"l x 26"w x 24" high - 12mm starphire on the three viewable sides. I do not use standpipes, and do not see the issue with drilling the bottom of a tank.

Would have to agree here my tank is 12mm tempered with 5 holes and I can jump up and down in it without breaking. I can stand on a piece of curved 5mm at work and it will only bust after I bounce up and down a bit.

Tempered bottom is the way to go if you want holes in the bottom. Just drill them first. Remember Its edges are its weakest point, but its 7 times stronger than float glass.
Just my 2 cents.