imisky's 30g custom tank

[Myka]

How's that calcium reactor supposed to work? No CO2 I assume... Does it just flow water through some media? Looks like the same idea as a PhosBan Reactor...?

[imisky]

it does require CO2 just like any of the normal calcium reactors

[Myka]

Ah ok. It's cute. Hehehe...I'm interested to hear how it works for you.

[imisky]

hey guys a quick and short update, i made some light hangers from aluminum rods 3/4" which will side right next to my tank. the height of the hanging rods are 7' tall and 3' long. connected via PVC 90d joints so i am able to quickly remove the upper bar if i needed to do something light taking the pendant lights fully off or something. i coated the aluminum rods with clear coat incase it does contain some elements which i didnt want.

heres some pictures i havent bolted it on yet )


what it would look light from the side:

[imisky]

and the last piece of equipment is now here, i bought 2x 150w aqua medic ocean lights and 2x phoenix 150w. im sure this will provide more then enough light to a 36" spread without having weird shaded areas.

so the move over to this 30g will happen next friday!! im getting excited about it, any advice on moving things over? in terms of water preping and etc? actually any advice would be good

[imisky]

no one can share there moving experience with me??

[tang daddy]

Hey eugene finally eh!!

moving your contents since your tanks are currently bb I would suggest moving sand in the new set up first and then move water over followed by corals and rock once done add alittle water keep heater and pumps running,and every few days add alittle more water essentially it's like doing WC but instead you're just adding and in a week the new tank should be filled, any other ??

[Skimmerking]

Originally Posted by imisky

no one can share there moving experience with me??

Hold on fella lots of people can give you opinions, but at the end of the day if how you want to do it, I can give you a crap load of advice on how to do it or what not to do.

1. IME take it slow if you are going to swap over the tank. Give yourself at least 6 hours Minimum. If you can use fresh Salt water if you are doing a swap this will help id you have any nitrates or excess of phosphates.

2. Take your sand out if you have any and clean it this will help in taking any spike that you have in your water after moving the sand. Now this is for getting rid of the ammonia spike that you may have. Only do this if you have had the sand in the tank for quite some time, the bad thing is you are taking out all the little creatures in the sand that live in there. But you are stopping any spike in the water that will happen or arise.

3. Take your rock out and rinse it off this will help in taking out any crap that has been in the rocks and helps in keeping your rock clean. And if you have any Algae on the rocks clean it with a brush.

4. once your done take the time to aqua scap the rock the way you want it, and keep in mind that if you have any corals and fish put them in a tub while the move is going on with a power filter and heater. Having a light over it doesn’t really matter since you are going to have the light on the tank after you have this task completed.

5. Once you have the water in and heated climatize the fish and coral and add them to your tank. Clean up and there you go. Remember depending on your lights if you are upgrading your lights to a more powerful setup if you can raise your lights and lower the photo period to allow for the corals the time to get used to the new lights.

HTH.

remember time is every thing, I have moved many tanks over and lost pretty much no corals or fish. Time your time when moving your fish and corals will love you...

[LeeR]

you're tank has inspired me to start a new tank... haha good job


do you have any pictures of the tank and the lights?

[JDigital]

that is a Cool looking overflow box! Tank looks great!