Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > Other > Lounge

Reply
 
Thread Tools Display Modes
  #1  
Old 12-27-2007, 10:26 PM
michika's Avatar
michika michika is offline
Member
 
Join Date: Nov 2004
Location: YYC
Posts: 5,063
michika is on a distinguished road
Default

Tagging along. I also have a Nikon, but its a D40x and not a D70. However I'm sure there is tons to learn either way.

Have you thought of checking any books out of the library on the subject?
__________________
+.-.+.-.+.-.+.-.+.-.+.-.+
I glue animals to rocks
Reply With Quote
  #2  
Old 12-28-2007, 02:11 AM
skylord skylord is offline
Member
 
Join Date: Apr 2006
Location: Maple Ridge BC
Posts: 346
skylord is on a distinguished road
Default

I also have the D40X and have decided the only way to fix this is to spend even more money and get a F2.8 60mm Macro. Spending more money always seems to be the cure.

Scott
Reply With Quote
  #3  
Old 12-28-2007, 02:24 AM
Slick Fork's Avatar
Slick Fork Slick Fork is offline
Member
 
Join Date: May 2006
Location: Red Deer, Alberta
Posts: 631
Slick Fork is on a distinguished road
Default

I got a Sony Alpha 100 DSLR and from the 2 or 3 days I've had to play around with it I'll second the recommendation for spot metering. Is RAW the preferred format for shooting?
Reply With Quote
  #4  
Old 12-28-2007, 02:56 AM
Jason McK's Avatar
Jason McK Jason McK is offline
Member
 
Join Date: Mar 2003
Location: Ladner,BC
Posts: 3,032
Jason McK is on a distinguished road
Default

I would say for day to day shooting RAW is unnesassary. the biggest problem with RAW are the tools Light 'DarkRoom' are just a difficult to use as Photoshop. but with practice you will greatly improve your pictures.
If you plan on printing your pictures YES Shoot RAW.

When buying Macro lenses be aware of Focus/Magnification. Some Macro lenses have Maxinum limits on focus.

J
__________________
My old Tank Shut down Jan 2011
New 220G build about to start
Reply With Quote
  #5  
Old 12-28-2007, 05:06 AM
Slick Fork's Avatar
Slick Fork Slick Fork is offline
Member
 
Join Date: May 2006
Location: Red Deer, Alberta
Posts: 631
Slick Fork is on a distinguished road
Default

Just for comparison and to demonstrate spot metering vs pattern metering...

This first shot is using the pattern metering, regular jpeg "macro" mode. In this picture it looks like it metered more for the background and overexposed the coral. It was also one of the first 20 pictures I took with the camera so there are probably a couple of dumb mistakes in there!



Here's a shot I took of the same coral a day or so later using the spot metering mode and the raw output. No Macro lense, just the 18-70mm. I didn't do anything to the picture, just straight converted it into a jpeg and it turned out pretty good.

Reply With Quote
  #6  
Old 12-29-2007, 05:54 AM
Gooly001 Gooly001 is offline
Member
 
Join Date: Jan 2006
Location: Aldergrove, B.C.
Posts: 451
Gooly001 is on a distinguished road
Default Go

The trick to shooting through a fish tank is understanding the concept of White Balance. Although it is a simple concept, I find it hard to explain myself so here are some info off the internet:

http://www.dpreview.com/learn/?/Glos...Balance_01.htm

http://www.photoxels.com/tutorial_white-balance.html

http://www.cambridgeincolour.com/tut...te-balance.htm

So what you should do is set something white inside the fish tank and fill up the frame with it. Then manually set your white balance so that the camera adjusts it meter accurately. Recompose the scene without the white object and shoot. This should give you a more accurate color reproduction then using AWB. A caution for using a white reflective object is that it may cause your cameras exposure meter to under expose the scene, making it look darker then it is. To compensate for this set your manual exposure control to 1 or 2 stops ( depending on the white object ) to overexposing the scene.

Another way to control White Balance is to shoot in RAW. Shooting in RAW, your camera will not preselect a specific White Balance for you, but rather shoots the scene as it sees it. Using an editing software such as Nikon Capture you can easily correct the photo to the appropriate White Balance setting. Editing with a RAW software is a lot easier then having to mess around with Levels and Curves in Photoshop.

Another tip is to shooting close up macros with an aperature of around f/8 or f/11. Using f/8 or f/11 the whole macro object will be relatively sharp but you might need a tripod as the shutter exposure can get low resulting in a blurred image.

If you try shooting with an aperature value of f/2.8, you can increase your shutter speed, therefore you can hand hold your camera; however the focus distance is very shallow and you may only have a sliver of the macro image in focus. Luckily this is a digital world and it is cheap to erase and try again.

Because you are shooting through water and water magnifies, you need to shoot straight on perpendicular to the object or else you will get a horrible magnifying effect. Make sure that your lens is positioned as close to to object as possible to help reduce magnification. You can also move the object closer to the front of the fish tank so that you are not shooting through much water. Hope some of these tips will help.
________
Suzuki RV125

Last edited by Gooly001; 01-25-2011 at 04:59 AM.
Reply With Quote
  #7  
Old 12-29-2007, 06:35 AM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default

Just adding a link, I found this page on presetting the white balance on the Nikon D70s:
http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00CWry

Question, what are folks using for setting white balance? Piece of acrylic, or ... ?
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 06:19 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.