Profilux II plus aquarium controller

[Matthias Gross]

please contact Aqua Digital for a original fuse from GHL

[Slick Fork]

Thanks

Is there any reason I couldn't just go to an electronics store like radio shack or something and get an 8 amp fuse from them?

[Matthias Gross]

Hi,

you can do this if you want. But: Please make sure that it's exactly the same type (8A, 125V, time-lag, UL/UR or CSA certificated!).
And we made once the experience that there are fuses available which become very hot. Our fuses are high quality fuses and have a minimum power dissipation.

If technical datas are ok and the fuse doesn't become too hot -> go to an electronics store.

[Slick Fork]

Thank you Matthias,

I am planning on grabbing a full set of GHL fuses from aquadigital. I just want to get this up and running again as quickly as possible!

[egareef]

Hello,

first, I do not speak very well English.

I have profilux II and I have a problem with "dosing pump unit (4)".

I have connected them to the S1-S4 (digital).

Extras-->Dosing Pumps
----------------------
Dosing pump Flowrate Rate/dosing Dosings/day Description
------------------------------------------------------------------
1 ................... 60 .............60..................1................ .A
2 ................... 60 .............60..................1................ .B
3 ................... 60 .............60..................1................ .C
4 ................... 60 .............60..................0................

Extras-->Socket functions
-------------------------
Socket Function Description
------------------------------------------------------
S1.........Dosing pump 1...................A
S2.........Dosing pump 2...................B
S3.........Dosing pump 3...................C
S4.........Dosing pump 4
S5.........Timer 1............................T5
..........
..........
..........


I have marked "Digital powerbar connected on S1-S4"

I have pressed the button "Program digital......."

My question:

If it is correct, where the hour of starting is programmed?

Thanks for all.

EgaReef

[reef]

dosing pump no 4 you have 0 for dosing days, so it wont dose anything.

[egareef]

Thanks, but..

No, the unit number 4 I still do not use it.

But,

unit 1 started to 00:00 hours
unit 2 started to 00:07 hours
unit 3 started to 00:15 hours

all perfect one.

The hour can be changed to start?

Thanks

[Matthias Gross]

Hi

in dosing mode the start time can't be changed, the times are calculated automatically. If you want to dose at specific times you have to use a timer instead of the dosing function.

[egareef]

thanks.

[egareef]

hello,

I have another question (I want to connect two tunze 6055):

I have connected to L1/L2 the module EVG-AP 2F with a single dimmable balasts (L1) and free L2. To L3/L4 I have connected MoonWB (L3) and free L4.

If I buy the module YL2-1 (connected to L3/L4), I can connect MoonWB and a tunze 6055.

how can I connect the other tunze?

thank you