|
|
|
|
|
#1
12-09-2007, 02:03 AM
|
|||||
|
|||||
Suggestions for what? Next time?
I use an alarm clock. Filling a 23g tote usually takes 5 to 6 1/2 hours with my RO/DI. I always calculate it first based on the gph of the last fill. Fill time depends on filter age and water temp...which affects psi. So I set the clock for anywhere from 4 1/2 to 6 hours...whatever I've calculated. But the alarm is always set for well BEFORE the end time. If I need more time....say 1/2 hour....I'll advance the alarm 20 minutes. But near the end I am always hovering around the tote. Not one flood ....yet. Long story short....for 15 minutes?.....stand there and watch it. I don't get why you would choose to go to sleep at that point  .Cheers,
__________________
Mark. Last edited by Johnny Reefer; 12-09-2007 at 02:05 AM. 
|
|
#2
12-09-2007, 02:21 AM
|
|||||
|
|||||
|
I feel your pain. I left mine running on friday and ended up with about 20 gallons on my hardwood floor.
I am moving my RO unit right now to the laundry area, which is closer to the tank, but also has a large sink so I can put my jug right in the sink. Also spills are easier to clean up.
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website
|
Hybrid Mode
