![]() |
|
#1
|
||||
|
||||
![]() Try sticking a powerhead in your water.Should clear up overnight if not I dont now if I would put it in the tank
|
#2
|
|||||
|
|||||
![]() Yeah it was somewhat cloudy when I used it, granted it was way back when, like 3 years ago.
|
#3
|
|||||
|
|||||
![]() I'm currently using it until I run out of it, its actually one of the "dirtier" salts out there, hence the cloudiness. I recommend switch to IO or Tropic Marin. Tropic Marin can be mixed and as soon as the water temp matches be used right away.
|
#4
|
|||||
|
|||||
![]() Tropic Marin (the reef blend) is one of the leading salts out there right now, but will cost ya about $80 for a 200 gallon pail. I would also recommend Instant Ocean over Kent. You'd think for the price of Kent you'd be getting a decent salt...but nope.
|
#5
|
|||||
|
|||||
![]() Kent was bought by the same company that owns Coralife a year or two back, and they've had a lot of problems since then. QC issue's mainly....
|
#6
|
|||||
|
|||||
![]() I have used it ten years. Aside from a bad batch, I've never had problems with cloudiness, it is crystal clear. However I do mix it for 24 hrs prior.
|
#7
|
|||||
|
|||||
![]() thx for the reply guys but I had waited 2 days for it to clear eventually had to dump 50g of rodi and make new water. I have never used kent before must be one of those 1st time bad batch expeirences anyhow I was able to switch back to IO guess I better stick with what I know works!
__________________
Always looking for the next best coral... 90g starphire cube/400mhRadium20k/2 XHO/2x27w UV/2x39w T5/ 3 Trulumen led strips |