Directing return from canister filter

[X-Treme]

Originally Posted by GreenSpottedPuffer

Do you mean you are going to use a canister filter as a return pump? Very bad and risky idea if so. Too much can go wrong...

I'm pretty sure he says it is return from a CANISTER FILTER. Not that he is using a canister filter pump as a sump return.


What about using just the spraybar from the filter but UNDER the water level? (I'm not an expert tho. I've never used a canister in salt water before)

[tknude]

I have a sumpless 33 gallon tank and just added an XP3 canister filter to split the return to the tank and through a phosban reactor. So the Loc line should do the trick in allowing me to direct my flow the way I want. Thought about the spray bar but did not give it a try. I am going to have to build a PVC part to go from the return hose to go over the back of the tank due to a part leaking. So thought I could incorporate the Loc Line.

Thanks. Ted.

[Pan]

The Xp's have some sort of jet nozzle adapter that has a pivot do they not?

[tknude]

I bought it used so I'm not sure if I have a piece like that. I don't think so. Curently it has the 2 90 degree bend part over the back and a small part hanging down with another 90 degree shooting across the top of the tank, but it dripps (currently into the tank). If it came unsuctioned to the back of the back of the tank it would drip onto the floor. Amy suggestions for preventing suction cups from detatching from a painted back of a tank?

Ted.

[digital-audiophile]

Go see Albert at Golds, he can hook you up with Loc Line

[tknude]

Will do. Thanks all.

[robert]

... or here.