![]() |
|
#1
|
|||||
|
|||||
![]() Catherine
What kind of kalkreactor are you using?
__________________
300 gal starphire custom built in pentagon reef (+90 gal sump on Blue Line 100 HD return pump, 210lb LR, Euro-Reef RC250 skimmer, 2x400W MH, 2x28W compacts, 2xTurbelle classic 4002 pumps & Turbelle Stream 6100 on 7095 Multicontroller, running ZEOvit) Livestock Fish: damsels; sailfin, yellow, regal & naso tangs; ocellaris & tomato clowns; lyretail anthias; foxface lo; flame angelfish corals: a few |
#2
|
|||||
|
|||||
![]() A DIY reactor, its a phosban reactor, which I've adjusted a bit. Its been working well, but does require the odd shakeup.
This is what it looks like: ![]() ![]() |
#3
|
|||||
|
|||||
![]() Hey, michika, that's a clone of my kalk reactor! Except I've got my osmolator attached instead of the maxijet.
![]() |
#4
|
|||||
|
|||||
![]() ![]() |
#5
|
|||||
|
|||||
![]() Catherine
Does the Maxi-Jet mix the kalk or is it just used for pumping the effluent out of the phosban reactor? Do you have it on a timer? I also have mine connected to the Tunze osmolator (works great).
__________________
300 gal starphire custom built in pentagon reef (+90 gal sump on Blue Line 100 HD return pump, 210lb LR, Euro-Reef RC250 skimmer, 2x400W MH, 2x28W compacts, 2xTurbelle classic 4002 pumps & Turbelle Stream 6100 on 7095 Multicontroller, running ZEOvit) Livestock Fish: damsels; sailfin, yellow, regal & naso tangs; ocellaris & tomato clowns; lyretail anthias; foxface lo; flame angelfish corals: a few |
#6
|
|||||
|
|||||
![]() The maxijet just pumps the effluent, hence my need to mix it up. I have it on a drip system, so it doubles as my top-off. I'm told that I could add on a second pump to mix the kalk, but it requires drilling the reactor, and frankly powertools and I aren't a good mix. No need for a timer as it only moves about 1-2g per day, and no risk of flooding the system because I don't keep enough water in the bucket for that.
Any photos of your reactor with the Tunze osmolator? |