|
|
|
|
|
#2
02-23-2007, 07:21 PM
|
||||
|
||||
First tank shot!
Wow, thanks for the welcome
 I have my first (albiet low quality) picture of my tank. Still clearing out some of the murkiness and just letting the one piece of liverock start the cycle process. Will be buying more rock next month!  -Eric 
|
|
#3
02-26-2007, 06:43 AM
|
||||
|
||||
|
First batch of measurements
Well, the tank has been cycling for about a week now, I decided to take my first batch of measurements to see how things are progressing.
Temperature: 76 Salinity: 1.025 (added some water just now, trying to get it back to 1.023) pH: 7.5 - I am told that my pH should always be above 8.1 I don't know yet if this is something remedied by the cycling process or if there is some sort of pH adjustment chemical/proceedure I need to use. If anyone knows that would be great! Ammonia - 0.04 - Looks safe to me. I figured there would be more Ammonia this early in the cycle process but I guess it's going along better than I thought. Nitrite - 0.0 All in all it looks like the cycling is going well but it is going to take a while longer before I begin to introduce any livestock or anything like that. Picking up some more rock from a coworker who got out of the hobby a while back. I will work on adding that and aquascaping until all of my levels read safe. -Eric
|
|
#4
03-02-2007, 04:51 AM
|
||||
|
||||
|
Wouldn't be a bad idea to measure your Calcium and your Alk, you'd have a better idea of what to do to adjust your pH. Read the chemicals sticky in the Reef section it will explain how to adjust each of your parameters safely. The staff put a lot of work into that stuff to make it easier for us so don't be afraid to use it.
Doug
|
|
#5
03-08-2007, 06:30 PM
|
||||
|
||||
|
Thanks for the advice BCOrchidGuy!
I didnt know about the chemicals sticky, it IS really useful. I haven't gotten any test kits for alk or calcium, but the pH did manage to hit 8.5 which is nice. Now for the bad news. I now have a small outbreak of Green Hair Algae in the tank. I caught it early enough so I am working with it now. Because I have no fish or snails or anything in the tank, I am simply performing regular water changes with store bought R.O water (to keep the phosphates down) and I have disabled my lights. I figure if there is no light for about a week, the GHA can't spread much more and if there are no phosphates to feed on then all the better. All of my tests for pH, Amonia, Nitrate/Nitrite and Salinity are in the safe areas. I am going to introduce some herbivorous snails in a couple days. They should be able to eat at whatever GHA is left and I will slowly increase my photoperiod over the next week or so. If anyone can recommend a type of snail for this purpose I would really appreciate it. I hear Turbo snails are good for this but I am not certain.
|
|
#6
03-08-2007, 07:14 PM
|
|||||
|
|||||
|
Welcome fellow Edm reefer.
Not to push any one vendor but for inverts (and now more) Neals the guy. http://216.187.96.54/vbulletin/forumdisplay.php?f=57
|
|
#7
04-01-2007, 10:18 PM
|
||||
|
||||
|
Same boat
Thanks for posting your setup,
I am one step behind you in setting up my first Salt tank as well. I was thinking about the cycling process too, as I will soon be starting it. Is it possible to cycle your tank with the lights off? I mean not indefinitely but once your live rock has been in there for three weeks you could then switch them on. It would probably reduce your chances of getting nuisance algae. Its just rough to have all those nutrients floating around without being able to put in anything to eat the inevitable algae. Lights off mean no algae can grow right? Unfortunately neither can anything else. Might be worth it in the beginning though.
|
|
#8
03-09-2007, 04:00 AM
|
|||||
|
|||||
|
Quote:
|
|
#9
03-21-2007, 06:32 PM
|
||||
|
||||
|
Dodged A Bullet / Question
I dodged a bullet yesterday with regards to a protein skimmer purchase.
I don't really need it yet but I have the budget for a cheap one so I figured I would get it out of the way. I didn't do too much research as this was sort of an impulse buy online while at work but I put in an order for a Seaclone 100. I deciding, after I had placed my order *dumb*, to see what others thought of this model and the results were frightening. Luckily I was able to cancel the order before it shipped. Does anyone know of a good, preferrably cheap, protien skimmer that I can 'set and forget' somewhat? I was looking at a couple of the AquaC Remora's that everyone seems to like but they are a fair amount more expensive. I will go with it if I have to but that may mean putting it off for a while.
|
|
#10
03-21-2007, 06:53 PM
|
||||
|
||||
|
When i set up i used a Lee's in tank protein skimmer (needs air pump) for cheapness. It worked fine and did the job. I only upgraded it after 3 years to take my tank to the next level.
If you lived nearer you could have mine. I only have a 33G tank so i dont know if you can find one for bigger but it might get you going. Also, better to bite the bullet and get all your uncured live rock in there now so that when the cycle is done you are ready to go. Otherwise you will have to add cured rock at more expense each time unless you add one small piece of uncured each time. This is the limit of my experience. More experienced auarists could give you better advice.
|
Hybrid Mode
