|
|
|
#3
02-23-2007, 12:44 AM
|
|||||
|
|||||
I used a 1/2" john guest type fitting. It has to be drilled out to let the probe pass right through. You just pop out the retainer ring and o-ring, then run a drill bit through, then put it back together. Oh, and you need to make sure you heve the fitting that has the 1/2" np threads so its large enough for the probe to pass through.
Having the probe in the reactor is not mandatory, but I have noticed it is much more accurate to control.
__________________
I retired and got a fixed income but it's broke. Ed _______________________________________ 50 gallon FOWLR, 10 gallon sump. 130 gallon reef, 20 gallon sump, 10 gallon refugium. 10 gallon quarantine. 60 gallon winter tank for pond fish. 300 gallon pond with waterfall. 
|
Threaded Mode
