![]() |
|
#1
|
|||||
|
|||||
![]() That pic. of the tank from the front is awsome. I really like how the tank is longer than the hole in the wall, it looks like it goes on forever. I also like the lighting you have as long as your not going to keep light dependant creatures.
What is your temp. running at so far?
__________________
Manuel it's not the size of the fish, it's the motion in the ocean! |
#2
|
||||
|
||||
![]() Will the capacity of the sump work with surge tanks?
|
#3
|
||||
|
||||
![]() Dale, just to give you a heads up. Certain types of pacific anemones have zooxanthela which feed the anemone through photosinthesis especialy the ones found in the shalow tide pools. Surely they can tolerate many less sunny days than their tropical relatives but might require the same intensity of light just not as often. I would think your different types of algea will require the same intensity of light, again, perhaps not 8 hours a day year round but SOME intence light.
I like your skimmer. thinking about building one like it. How is it woking for you? I cant wait to see the surge tanks and how all of that functions. Ive always dreamed of doing something like that. Keep up the good work. |
#4
|
||||
|
||||
![]() Dale,
I will be selling my 50g sump tank in a week or two. It's 48" long by 12" wide by 20" tall. PM me if you're interested, since you were asking for one in one of your posts. BTW, what size is your current sump tank? Maybe we can just do a straight swap. Mine has single baffle installed already. Anthony |
#5
|
|||||
|
|||||
![]() Well, my substrate experiment just keeps getting better (not).
Apparently the "green diamond" grit isn't a granitic based substrate at all but Nickel slag!!! Argghhh. A quick check on the www.targetproducts.com website (which I should have done if it hadn't flown under the radar on me) tells me I have a metal based substrate with low to moderate toxicity to fish. It took me by surprise as I never thought that slag would look like that. So... don't buy that stuff ![]() Last edited by Dale; 11-28-2006 at 05:24 AM. |
#6
|
|||||
|
|||||
![]() Bummer.. it looked so good.
![]() I've got to ask though .. why not just use the real thing? Couldn't you just go to a beach somewhere and dig up a couple buckets worth? Or is there a reason that won't work? (Has to be probably the most economical thing though??)
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#7
|
|||||
|
|||||
![]() Well, that took a little while (June 2006 - May 2008)
Here's a shot of the tank now ![]() Hum... It's no longer a 135G. tank. That tank was moved to the rear of the fishroom and now houses my school of freshwater sunfish. In its place I've installed a 75G. display serviced by a 100G. sump. Here's a schematic of the sump set up: ![]() The one change is #12 listed as a closed loop feed. The surge from the CSD was a little too much so I had to plumb that line as an additional drain into the sump. and a shot inside the fishroom: ![]() Everything is a little rough right now. As I decide that each system is working as wanted I will tidy things up (even though, as a hobo reef, the decor could be called "shabby chic" Here's a shot of my return pump; a modified AC 110 powerfilter. Two of my goals were to reduce power consumption as a whole and to reduce heat inputs into the system (mainly removing submersible pumps that heat the surrounding water). By mounting the sump 10" lower that the display I could use the AC 110 filter as a return. It runs on 14 watts and the pump is external. ![]() Last edited by Dale; 05-16-2008 at 05:12 AM. |