1 1/4" Gate Valves?

WWWD · #1 11-10-2006, 03:03 AM

Which gate valve mod did you guys do for your G3's? I see there is the standard one and an alternate.

Tom R · #2 11-10-2006, 03:36 AM

Hi WWWD

I bought my 1 1/4" gate valve for aprox $18 at OA. I added the gate valve option to my G5 and it not only gave you better control of the height adjustment it also reduced the noise of the water falling from the outlet.
You are welcome to have a look at mine.

Tom R

Delphinus · #3 11-10-2006, 04:31 AM

I completely forgot that I also bought a gate valve at OA for a skimmer. My bad. That's an option too.

Of the gate valve mods I did the first one (the second one has the valve after the T? or am I looking at the wrong page).

mark · #4 11-10-2006, 04:37 AM

did the first one, valve before Tee

WWWD · #5 11-10-2006, 05:44 AM

Quote:

Originally Posted by mark

did the first one, valve before Tee

on a g3? works ok?

mark · #6 11-10-2006, 01:36 PM

Quote:

Originally Posted by WWWD

on a g3? works ok?

Yep okay on a G3, but that's not to say I had problems controlling before the mod, just easier with the valve. Had the pieces since I ordered them along with the skimmer from asmskimmer.com thought I should use them.

Found the bubble level would stay constant in the throat and would only need to adjust every month or two and that was after I pulled the skimmer and pump out for cleaning as would take a bit to settle down. If just taking off the cup and and rinsing it wouldn't need to adjust after putting the cup back.

Move the valve maybe 1/8 of a turn changes level in the throat by 1/2".