Movin' on up

[RobbAdams]

OK Here is the first picture of something, this is the return line and is my first time working with PVC alos shown is part of the drain line. I can't finish until I get the tank for my sump from Keith (Wink, Wink, Nudge , Nudge).

I wish I kinew how to use my camera, this makes my tank look like an algae farm, the water does not look like this at all?



and here is my CBB



Robb

[RobbAdams]

How do i build a durso for a 1.5 inch drain in my CPR. I have read that you need to use a larger pipe diameter, however I thing the next size up is 2". I don't think it would all fit inside. The gurgling noise is going to make my wife crazy Help.

Robb

[RobbAdams]

well I think things are finaly almost finished after only 30 days I think I am close. I am still working on a lighting upgrade as I only was runing a single 175 MH over my old rig. and I need to build a proper canopy. Still wondering on the logistics of building a durso for a 1.5 inch drain. Will post some updated Pics Later tonight

[midgetwaiter]

Try a stockman style standpipe instead.

[RobbAdams]

Here are some pics of the setup as promised.

Full Tank shot:



Sump Beside Tank:



Current Ghetto lighting setup with halide only on one side of tank

[albert_dao]

Yo Rob,

Check these out:

http://reefcentral.com/forums/showth...5&pagenumber=1

[RobbAdams]

Line up at the local cleaning station



Candycanes that just don't seem to want to inflate as much as usual lately



Zoa Rock with some neat blue sponges growing in.

[RobbAdams]

closer pic with my crappy 1 megapixel camera of Sponges: