Movin' on up

muck · #1 08-03-2006, 07:32 PM

Quote:

Originally Posted by albert_dao

In anycase, I could probably whip up a sump for those dimensions, but you'd be using Zeovit, har har har.

albert_dao · #2 08-03-2006, 07:35 PM

Okay, I drew one out on paper. Give me a few minutes to transfer it to a computer image.

albert_dao · #3 08-03-2006, 08:07 PM

Okay

GOD!

I had this whole explanation written up on the sump and the stupid browser closed on me. Piece of crap.

Anyway, here it is again:

I've narrowed the sump to 12" in order to get the Snapper in behind the whole thing (or the front if you want ease of maintainance). I've also plopped in a few upgraded equipments just for show. Aside from that, at 18" tall, you should be looking at a 25 gallon sump. If you're concerned about an overflow (power outtage), just make sure you plumb the return into a manifold that sits on top of the tank or suspended under the frame. This should reduce, if not remove, any drainage into the sump.

The last thing you'll need is a good auto top-off unit (PM me) and you'll be set.

Midknight · #4 08-03-2006, 08:13 PM

What took you so long?

albert_dao · #5 08-03-2006, 08:15 PM

Quote:

Originally Posted by Midknight

What took you so long?

You gotta factor in "MSN chatting" and "eating" time when you do these things :P

RobbAdams · #6 08-03-2006, 09:28 PM

Next question, How much would this cost me? Sans Zoevit (Sorry Albert, Im not sold on this yet) . I guess I could probably find a beat up old 25 gallon on buy'n'sell. Nah, I don't really know how to drill it, and I would still have to source all the rest of the glass to build the bafles etc.

I am still confused, I thought the baffles had to be before the snapper in order to prevent microbubbles from the skimmer getting pumped back into the display?

Midknight · #7 08-03-2006, 09:32 PM

Hey Robb,

Check out Craigslist.com Lots of free stuff.
Have picked up lots of used/abused tanks and disasembed for parts.

albert_dao · #8 08-03-2006, 11:41 PM

Quote:

Originally Posted by RobbAdams

Next question, How much would this cost me? Sans Zoevit (Sorry Albert, Im not sold on this yet) . I guess I could probably find a beat up old 25 gallon on buy'n'sell. Nah, I don't really know how to drill it, and I would still have to source all the rest of the glass to build the bafles etc.

I am still confused, I thought the baffles had to be before the snapper in order to prevent microbubbles from the skimmer getting pumped back into the display?

The baffles are only at the drain. I've found that EuroReef skimmers produce almost zero microbubbles. If you are running into problems with micro bubbles, it's just a matter of making a bridge from the outlet of the ER into the initial drain compartment.