![]() |
|
#1
|
|||||
|
|||||
![]() what settings are you using?
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#2
|
|||||
|
|||||
![]() I have it kick off when it reaches 75 and kick on when it reaches 78.
__________________
Jason |
#3
|
|||||
|
|||||
![]() not sure if it's over worked, but mine is now doing the same thing!
__________________
Brad |
#4
|
|||||
|
|||||
![]() I ended up removing the front panel and placing a fan in front of it. It still doesn't keep the temp at 78 with the lights on but when they're out it's pretty good. It's been bloody hot out lately though with little wind to circulate.
__________________
Jason |
#5
|
|||||
|
|||||
![]() Just discovered that the internal fan isn't spinning, so that will be the cause of my problem. I'll try to cool the condenser with a house fan until I can replace the internal fan. Not sure if I can find a part locally or not.....
__________________
Brad |
#6
|
|||||
|
|||||
![]() I had the same thing happen to me actually. I just had to oil it with WD40 and then start spinning it manually before it started spinning itself again. It took a few tries but it eventually started again.
__________________
Jason |
#7
|
|||||
|
|||||
![]() Quote:
![]() Steve
__________________
![]() Some strive to be perfect.... I just strive. |