Good Glue to Glue A Zoo

[Willow]

get an old cutting board or something out. pull your zoos out and chop them up into your frag sized pieces. blot behind them so they aren’t super wet, do the same for your rock you are attaching them to. squeeze some of the glue onto the rock, you don’t need a whole lot and spread it around with a toothpick for your coverage area. sit your frag down into the glue and use a little pressure to make sure it sits in there ok. let it set on your board for a few mins then slowly submerge it back into the tank. let it sit for a few days in a lower flow area. if some of the corners of your new frag come loose just pull it back out and squirt a little glue back under and repeat the process. should be pretty easy after you have done one or to.