|
|
|
|
|
#1
03-03-2006, 10:37 PM
|
||||
|
||||
Like Mike said, most SS hose clamps are not 100%. I special ordered some that were 100% SS and used them in my sump for a while. After about 6-8 months they started to rust so I assume they were not the right grade of stainless. Didn't cause any problems that I could see though, and I removed them and used Zip Ties with a zip tie tightener which worked great. A few days until you can get replacements will be fine.
__________________
Marcel How was I to know that Salt was an addictive drug? 
|
|
#2
03-04-2006, 12:22 AM
|
|||||
|
|||||
|
the tipical SS hose clamp is good for fresh water but will still rust in salt water as they have to use a different ss aloy to keep it maluable so it doesn't get brittle and brake from bending around stuff. I would stick with plastic if you can.
now if this clamp is outside the tank and not submerged then goahead and get a SS hose clamp from canadian tire. Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#3
03-04-2006, 07:49 AM
|
|||||
|
|||||
|
zap straps
__________________
http://www.canreef.com/ftotm/sept05/index.php
|
Hybrid Mode
