#1
|
|||||
|
|||||
Grounding questions...
Attempting to finally wire up my retro MH, as it's been collecting dust on a shelf for the past year
Supplies are lined up: 16/3 wire & plug, soldering gun and heatshrink tubing. I know which wires from the ballast go where, but I'm unsure of how to ground the reflector and mogul socket. Can I just strip out a single strand from the 16/3 cord for this ground wire? Should I use those butt-end circle connector thingies at the ends? My ballast box has no grounding screw (or any bare spot, for that matter) to attach a ground, but there are slots (painted tho') for attaching with screws, to a wall etc. Whats's the best way to attach the other end of the ground wire to the mogul/reflector? (between the metal mogul base, where it attaches to the reflector? See arrow in pic.) Any and all help much appreciated! ~Tamara |
#2
|
|||||
|
|||||
post
When you screw the base to the reflector you can install the ground wire (green one) inbetween the 2.
I would use a wire terminal stud conector (ones with the hole in the middle) take a piece of sandpaper and scrape the paint where the stud conector will touch the base and reflector, this will give you a good ground Robert
__________________
http://www.globalreefers.com/ |
#3
|
|||||
|
|||||
Re: post
Quote:
That's the part that's confusing me. I have the one ground (green) wire coming from the ballast, that's going to be soldered to the 16/3 wire/plug along with the hot and neutral wire from the ballast. Do I splice in an extra piece of green wire, from the socket/reflector and join this at the point the ballast's ground wire is going to joined to the cord/plug? ie: 2 ground wires (1 from ballast & 1 from reflector) will be connected to the 1 ground wire in my 16/3 wire? If so, how do I make this Y-join look purty with the heatshrink tubing? Sorry for all of the dumb questions... ~Tamara |
#4
|
|||||
|
|||||
just went and checked mine and I gounded it to the ground with that plugs into the wall.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one* Some strive to be perfect.... I just strive. |
#5
|
|||||
|
|||||
Quote:
~Tamara |